LOS NUEVOS USUARIOS REGISTRADOS DEBEN DE PRESENTARSE  PARA VER TODO EL FORO EN
PRESENTACIONES DE NUEVOS USUARIOS

Nueva Ncam 1.9 oficial

Iniciado por elcobo56, Mar 17, 2018, 12:41:48

Tema anterior - Siguiente tema

0 Miembros y 1 Visitante están viendo este tema.

elcobo56

 Nueva Ncam 1.9 oficial


   Código:
#########################################################################


NCam cardserver v1.9-r1, ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )
Copyright (C) 2012 - 2018 developed by Javier Sayago (Javilonas).
Visit https://www.lonasdigital.com/ for more details.
Source Code: https://github.com/javilonas/NCam


#########################################################################


**********************************************************************************************
Important notice !!

This is the OFFICIAL version (13.03.2018)
There are no later versions.

If you have downloaded any version, listed as 2.x, 3.x 4.x, 5.x etc ... These are FAKE versions.
Be very careful when downloading non OFFICIAL versions,
we are not responsible for those versions or what their authors may have added.

The "Mod" versions that do not show their changes publicly go against the GPL-3.0 license.
License NCam: https://github.com/javilonas/NCam/blob/master/COPYING

Signed: Javier Sayago (Javilonas)
***********************************************************************************************


Compiled:


ncam.mips                         Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc                  Enigma2 - Mipsel (Tiviar Plus and similar).
ncam.x86                          Linux PC (32 bit - i686).
ncam.x86_64                       Linux PC (64 bit).
ncam.ppc                          Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old                      Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4                          Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon          Enigma2 - (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
ncam.arm-raspbian                 ARM (Raspberry pi 3, Prismcube and other similars).
ncam.arm-android                  ARM (For all api android).
ncam.arm-marvell                  ARM (Synology DS114, DS214 and similar).
ncam.arm-mca                      ARM (For Matrix CAM Air).
ncam-router.mips                  Routers (Routers MIPSEL DD-WRT).
ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips   Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).
ncam-x86_64.exe                   Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
ncam-i686.exe                     Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).


***********************************************************************************************


Ncam settings web::


Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x or host-xx.org)
user: root
password: ldteam


Important: Change xxxxxxxxxx (0-9 and A-F) on the NodeID. (Important to respect all 16 characters.


Change serverip (CCcam) 192.168.xx.xx for the ip of the receiver.


Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config


SoftCam.Key Not included!!
The emulator is inactive for default , it is not possible to delete it, but yes disable it.


If you have any doubts, you can formulate it at https://www.lonasdigital.com/forumdisplay.php?f=1225


***********************************************************************************************


Changelog v1.9-r1:


- Support for CCcam 2.3.2.
- Fix Card Tivusat.


--------------------------------------------------------------------
--------------------------------------------------------------------
-------------
Legal warning
-------------
NCam does not emulate by default any payment signal without its corresponding suscription.
You, as an end user, will be responsible for the use that you will make and neither I am (Javier Sayago),
nor www.lonasdigital.com are responsible for what third parties can do with NCam.
--------------------------------------------------------------------
--------------------------------------------------------------------


If you want to invite me for a beer: https://www.paypal.me/Javilonas 



You require the following to view this post content :
  • Debes dar las gracias a este tema para ver su contenido (solo usuarios registrados y presentados).
  •  

Powered by EzPortal